Tips for using diamond wire saw rope | csdiamondtools.com
Nov 23,2020

Diamond wire saw rope is widely used for cutting granite, marble, travertine, limestone, sandstone, natural stone and concrete. This artile will show you the tips when using diamond wire saw rope?


1. Before stopping the diamond wire saw machine, stop feeding first, keep fly wheel rotating for a while, it will expand the gaps on cutting materials, therefore,  the diamond wire saw and diamond bead will not be stuck when start running the wire saw machine again.

2. If you need to stop the diamond wire saw machine to replace the guide rail, check both the wire saw conditions and machine,press down the emergency stop button on the operation station to ensure the safety of the operator.


3. Do not stop the diamond wire saw machine for a long time to prevent cracks in the rock layer from blocking the bead wire. Once the bead wire is blocked, it should be solved as soon as possible. Loosen the rope first, then pull it by hand to solve the problem according to the site situation.


4. Keep a safety distance away from the machine and diamond wire saw when the wire saw machine is cutting on.All operators or related person need to wear a safety clothing and hat.


5. When cutting with diamond wire saw, ensure the length of the cables in the working area and avoid being pressed by the guide rail.


6. When checking the wire saw machine, make sure the machine power off.


7. To prevent water and dust from entering and damaging wire saw machine, the Electronic control cabinet door should be closed during cutting .


8. During cutting, operators should wear safety helmets, insulating boots, masks, protective glasses, etc.


9. Before cleaning and maintaining the diamond wire saw, make sure that the main power supply is cut off.



Related Articles:

1.How ChinShine customers comment on diamond wire saw?

2.Why South Korean Companies are the Main Competitor Of China Diamond Wire Saw Rope?

3.The Principle of Diamond Wires Cutting from China Diamond Wires Saw Suppliers?

4.Why should you buy diamond wires from ChinShine?

5.ChinShine Quarry diamond wire saw for granite marble


copyright © 2024 Xiamen ChinShine Industry and Trade Corporation.all rights reserved. / sitemap / XML / Privacy Policy
leave a message
welcome to chinshine
Thank you for your inquiry, you may expect a reply in 24 hours.

home

products

about

contact